product detail
Drifting and tunnelling tools include rods, shank adapters, couplings and bits.
We have mainly 11 threads: SR22,SR25,R25, SR28,R28,SR32,R32,SR38,R38 and T35. Diameter: 38-127mm,They can be used with button bits, cross bits and reaming products.
Drifting and tunneling-R22,Drifting and tunneling-R25,Drifting and tunneling-R28,Drifting and tunneling-R32, Drifting and tunneling-R35 Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands and transmit intensive impact energy into the rock with the least possible loss of energy Especially our BIT R28 37mm,28 38mm,R32 45mm,R32 48 mm,BIT R32 51mm, Button Bit ,Retrac Bit, which is widely welcomed by our client with good quality and good price . Especially our H35，TUN ROD T38-Hex35-R32，Drill rod R32 H28 R28，MF rod, which is widely welcomed by our client with good quality and good price .
DRIFTING AND TUNNELING-R22/SR22 |
|
DRIFTING AND TUNNELING-R25/SR25 |
|
DRIFTING AND TUNNELING-R28/SR28 |
|
DRIFTING AND TUNNELING-R32/SR32 |
|
DRIFTING AND TUNNELING-R35/SR35 |
|
R22/SR22
R22/SR22 Thread Button bit
Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
Gauge | Front | |||||||
[No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
| 5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 |
5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 | |
5 | 8 | 2 | 7 | 34 | 1 11/32″ | 1 | 1 | |
5 | 8 | 2 | 7 | 34 | 1 11/32″ | 1 | 1 | |
5 | 8 | 2 | 7 | 35 | 1 3/8″ | 1 | 1 | |
5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
R22/SR22 Thread Cross bit
R22/SR22 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
Width | Height | |||||
[mm] | [mm] | [mm] | [in] | Front | Side | |
| 8 | 14 | 35 | 1 3/8″ | 1 | 4 |
8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
R22/SR22 Extension rod
HEX EXTENSION ROD R22 - R22 - HEX 22 7/8″ ROPE THREAD (22mm) X 7/8″ HEX (22mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 22 | 610 | 2′ | R22/SR22 | R22/SR22 | |
HEX 22 | 915 | 3′ | R22/SR22 | R22/SR22 | |
HEX 22 | 1220 | 4′ | R22/SR22 | R22/SR22 | |
HEX 22 | 1525 | 5′ | R22/SR22 | R22/SR22 | |
HEX 22 | 1830 | 6′ | R22/SR22 | R22/SR22 | |
R22/SR22 Shank rod
Shank rod R22/SR22 7/8″ ROPE THREAD (22mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 22 | 255 | 10″ | SHANK (108mm) | R22/SR22 | |
HEX 22 | 1000 | 3′ 3″ | SHANK (108mm) | R22/SR22 | |
HEX 22 | 1800 | 5′ 11″ | SHANK (108mm) | R22 | |
R28/SR28
R28/SR28 Button bit
Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
Gauge | Front | |||||||
[No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
| 5 | 8 | 2 | 7 | 36 | 1 13/32″ | 1 | 3 |
5 | 8 | 2 | 8 | 38 | 1 1/2″ | 1 | 3 | |
5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 | |
| 6 | 8 | 2 | 8 | 43 | 1 11/16″ | 2 | 0 |
6 | 9 | 2 | 9 | 45 | 1 3/4″ | 2 | 0 | |
| 6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
R28/SR28 Corss bit
R28/SR28 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
Width | Height | |||||
[mm] | [mm] | [mm] | [in] | Front | Side | |
| 8 | 14 | 35 | 1 3/8″ | 1 | 4 |
8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
8 | 14 | 45 | 1 3/4″ | 1 | 4 | |
R28/SR28 Extension rod
HEX EXTENSION ROD R28/SR28 - R28/SR28 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 610 | 2′ | R28 | R28/SR28 | |
HEX 28 | 915 | 3′ | R28 | R28/SR28 | |
HEX 28 | 1220 | 4′ | R28 | R28/SR28 | |
HEX 28 | 1525 | 5′ | R28 | R28/SR28 | |
HEX 28 | 1830 | 6′ | R28 | R28/SR28 | |
HEX 28 | 2435 | 8′ | R28 | R28/SR28 | |
HEX 28 | 3050 | 10′ | R28 | R28/SR28 | |
HEX 28 | 3660 | 12′ | R28 | R28/SR28 | |
HEX 28 | 3700 | 12′ 1-1/2″ | R28 | R28/SR28 | |
HEX 28 | 4005 | 13′ 1-1/2″ | R28 | R28/SR28 | |
R28/SR28 Extension rod
HEX Drifter rod R28/SR28 - R32 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/4″ ROPE THREAD (32mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 1220 | 4′ | R32 | R28/SR28 | |
HEX 28 | 1525 | 5′ | R32 | R28SR28 | |
HEX 28 | 2475 | 8′ 1-1/2″ | R32 | R28/SR28 | |
HEX 28 | 2590 | 8′ 6″ | R32 | R28/SR28 | |
HEX 28 | 2795 | 9′ 2″ | R32 | R28/SR28 | |
HEX 28 | 3090 | 10′ 1-1/2″ | R32 | R28/SR28 | |
HEX 28 | 3400 | 11′ 2″ | R32 | R28/SR28 | |
HEX 28 | 3700 | 12′ 1-1/2″ | R32 | R28/SR28 | |
HEX 28 | 4005 | 13′ 1-1/2″ | R32 | R28/SR28 | |
HEX 28 | 4305 | 14′ 1-1/2″ | R32 | R28/SR28 | |
HEX Drifter rod R28 - R38 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 2475 | 8′ 1-1/2″ | R38 | R28/SR28 | |
HEX 28 | 3090 | 10′ 1-1/2″ | R38 | R28/SR28 | |
HEX 28 | 3700 | 12′ 1-1/2″ | R38 | R28/SR28 | |
HEX 28 | 4305 | 14′ 1-1/2″ | R38 | R28/SR28 | |
HEX Drifter rod R28 - T38 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 2475 | 8′ 1-1/2″ | T38 | R28/SR28 | |
HEX 28 | 3090 | 10′ 1-1/2″ | T38 | R28/SR28 | |
HEX 28 | 3300 | 10′ 10″ | T38 | R28/SR28 | |
HEX 28 | 3700 | 12′ 1-1/2″ | T38 | R28/SR28 | |
HEX 28 | 4305 | 14′ 1-1/2″ | T38 | R28/SR28 | |
HEX Drifter rod R28 - R38 - HEX 32 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 3090 | 10′ 1-1/2″ | R38 | R28/SR28 | |
HEX 32 | 3700 | 12′ 1-1/2″ | R38 | R28/SR28 | |
HEX 32 | 4005 | 13′ 1-1/2″ | R38 | R28/SR28 | |
HEX 32 | 4305 | 14′ 1-1/2″ | R38 | R28/SR28 | |
HEX 32 | 4915 | 16′ 1-1/2″ | R38 | R28/SR28 | |
HEX 32 | 5525 | 18′ 1-1/2″ | R38 | R28/SR28 | |
HEX Drifter rod R28 - T38 - HEX 32 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 2475 | 8′ 1-1/2″ | T38 | R28/SR28 | |
HEX 32 | 3090 | 10′ 1-1/2″ | T38 | R28/SR28 | |
HEX 32 | 3400 | 11′ 2″ | T38 | R28/SR28 | |
HEX 32 | 3700 | 12′ 1-1/2″ | T38 | R28/SR28 | |
HEX 32 | 4305 | 14′ 1-1/2″ | T38 | R28/SR28 | |
HEX 32 | 4915 | 16′ 1-1/2″ | T38 | R28/SR28 | |
HEX 32 | 5150 | 16′ 10-3/4″ | T38 | R28/SR28 | |
HEX 32 | 5525 | 18′ 1-1/2″ | T38 | R28/SR28 | |
R32/SR32
R32/SR32 Button bit
Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
Gauge | Front | |||||||
[No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
| 5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 |
5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
5 | 9.5 | 2 | 9 | 43 | 1 11/16″ | 1 | 1 | |
5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 2 | |
5 | 11 | 2 | 10 | 51 | 2″ | 1 | 1 | |
| 6 | 8 | 2 | 8 | 41 | 1 5/8″ | 2 | 0 |
6 | 8 | 2 | 8 | 41 | 1 5/8″ | 2 | 1 | |
6 | 8 | 2 | 8 | 43 | 1 11/16″ | 2 | 0 | |
6 | 9 | 2 | 9 | 45 | 1 3/4″ | 2 | 0 | |
6 | 9.5 | 2 | 9.5 | 48 | 1 7/8″ | 2 | 0 | |
6 | 11 | 2 | 9 | 51 | 2″ | 2 | 0 | |
| 6 | 9 | 3 | 7 | 43 | 1 11/16″ | 3 | 1 |
6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
6 | 11 | 3 | 9 | 51 | 2″ | 3 | 1 | |
6 | 10 | 3 | 9.5 | 54 | 2 1/8″ | 3 | 1 | |
6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 43 | 1 11/16″ | 3 | 1 |
6 | 9 | 3 | 7 | 43 | 1 11/16″ | 3 | 1 | |
6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
Flat Face / Retrac | ||||||||
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 |
6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
6 | 10 | 3 | 9.5 | 54 | 2 1/8″ | 3 | 1 | |
6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
Bench drilling | ||||||||
Flat Face | ||||||||
| 8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 | |
Drop Center | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3″ | 3 | 0 | |
Drop Center | ||||||||
| 6 | 14 | 3/1 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 |
6 | 14 | 3/1 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 | |
Flat Face / Retrac | ||||||||
| 8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 |
Flat Face / Retrac | ||||||||
| 8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
Drop Center / Retrac | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
6 | 12.7 | 3/1 | 10 / 9.5 | 76 | 3″ | 3 | 0 | |
Drop Center / Retrac | ||||||||
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 1 |
8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 1 | |
R32/SR32 Cross bit
R32 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
Width | Height | |||||
[mm] | [mm] | [mm] | [in] | Front | Side | |
| 11.5 | 19 | 41 | 1 5/8″ | 1 | 4 |
9.5 | 19 | 43 | 1 11/16″ | 1 | 4 | |
11.5 | 19 | 45 | 1 3/4″ | 1 | 4 | |
9.5 | 19 | 48 | 1 7/8″ | 1 | 4 | |
9.5 | 19 | 51 | 2″ | 1 | 4 | |
9.5 | 19 | 57 | 2 1/4″ | 1 | 4 | |
R32/SR32 Drill rods
HEX EXTENSION ROD R32 - R32 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/4″ HEX (32mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 1500 | 4′ 11″ | R32 | R32 | |
HEX 32 | 2350 | 7′ 8-1/2″ | R32 | R32 | |
HEX 32 | 2475 | 8′ 1-1/2″ | R32 | R32 | |
HEX 32 | 2700 | 8′ 10″ | R32 | R32 | |
HEX 32 | 3090 | 10′ 1-1/2″ | R32 | R32 | |
HEX 32 | 3400 | 11′ 2″ | R32 | R32 | |
HEX 32 | 3700 | 12′ 1-1/2″ | R32 | R32 | |
HEX 32 | 4005 | 13′ 1-1/2″ | R32 | R32 | |
HEX 32 | 4305 | 14′ 1-1/2″ | R32 | R32 | |
HEX 32 | 4915 | 16′ 1-1/2″ | R32 | R32 | |
HEX Drifter rod R32 - R38 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 1570 | 5′ 2″ | R38 | R32 | |
HEX 32 | 1800 | 5′ 11″ | R38 | R32 | |
HEX 32 | 2200 | 7′ 2-1/2″ | R38 | R32 | |
HEX 32 | 2475 | 8′ 1-1/2″ | R38 | R32 | |
HEX 32 | 3090 | 10′ 1-1/2″ | R38 | R32 | |
HEX 32 | 3700 | 12′ 1-1/2″ | R38 | R32 | |
HEX 32 | 4005 | 13′ 1-1/2″ | R38 | R32 | |
HEX 32 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
HEX 32 | 4610 | 15′ 1-1/2″ | R38 | R32 | |
HEX 32 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
HEX 32 | 5525 | 18′ 1-1/2″ | R38 | R32 | |
HEX Drifter rod R32 - T38 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 2475 | 8′ 1-1/2″ | T38 | R32 | |
HEX 32 | 2600 | 8′ 6″ | T38 | R32 | |
HEX 32 | 3090 | 10′ 1-1/2″ | T38 | R32 | |
HEX 32 | 3400 | 11′ 2″ | T38 | R32 | |
HEX 32 | 3700 | 12′ 1-1/2″ | T38 | R32 | |
HEX 32 | 4005 | 13′ 1-1/2″ | T38 | R32 | |
HEX 32 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
HEX 32 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
HEX 32 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
HEX Drifter rod R32 - R38 - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3090 | 10′ 1-1/2″ | R38 | R32 | |
HEX 35 | 3700 | 12′ 1-1/2″ | R38 | R32 | |
HEX 35 | 4005 | 13′ 1-1/2″ | R38 | R32 | |
HEX 35 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
HEX 35 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
HEX 35 | 5525 | 18′ 1-1/2″ | R38 | R32 | |
HEX Drifter rod R32 - T38 - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 2475 | 8′ 1-1/2″ | T38 | R32 | |
HEX 35 | 3090 | 10′ 1-1/2″ | T38 | R32 | |
HEX 35 | 3700 | 12′ 1-1/2″ | T38 | R32 | |
HEX 35 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
HEX 35 | 4460 | 14′ 7-1/2″ | T38 | R32 | |
HEX 35 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
HEX 35 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
HEX 35 | 6140 | 20′ 1-1/2″ | T38 | R32 | |
HEX 35 | 6400 | 21′ | T38 | R32 | |
HEX SPEED Drifter rod R32M - R38F - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ FEMALE ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3700 | 12′ 1-1/2″ | R38F | R32M | |
HEX 35 | 4915 | 16′ 1-1/2″ | R38F | R32M | |
HEX SPEED Drifter rod R32M - T38F - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ FEMALE TRAP. THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3090 | 10′ 1-1/2″ | T38F | R32M | |
HEX 35 | 3700 | 12′ 1-1/2″ | T38F | R32M | |
HEX 35 | 4305 | 14′ 1-1/2″ | T38F | R32M | |
HEX 35 | 4915 | 16′ 1-1/2″ | T38F | R32M | |
HEX 35 | 5525 | 18′ 1-1/2″ | T38F | R32M | |
HEX 35 | 6140 | 20′ 1-1/2″ | T38F | R32M | |
Round Drifter rod R32 - R38 - RD 39 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
RD 39 | 1830 | 6′ | R38 | R32 | |
RD 39 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
RD 39 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
Round Drifter rod R32 - T38 - RD 39 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
RD 39 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
RD 39 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
RD 39 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
RD 39 | 6140 | 20′ 1-1/2″ | T38 | R32 | |
RD 39 | 6400 | 21′ | T38 | R32 | |
Shank rod R32 1-1/4″ ROPE THREAD (32mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 22 | 255 | 10″ | SHANK (108mm) | R32 | |
HEX 22 | 610 | 2′ | SHANK (108mm) | R32 | |
HEX 22 | 1220 | 4′ | SHANK (108mm) | R32 | |
HEX 22 | 1830 | 6′ | SHANK (108mm) | R32 | |
Shank rod R32 1-1/4″ ROPE THREAD (32mm) X 1″ HEX (25mm), 4-1/4″ SHANK (108mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 32 | 255 | 10″ | SHANK (108mm) | R32 | |
HEX 32 | 610 | 2′ | SHANK (108mm) | R32 | |
HEX 32 | 915 | 3′ | SHANK (108mm) | R32 | |
HEX 32 | 1220 | 4′ | SHANK (108mm) | R32 | |
HEX 32 | 1525 | 5′ | SHANK (108mm) | R32 | |
HEX 32 | 1830 | 6′ | SHANK (108mm) | R32 | |
HEX 32 | 2440 | 8′ | SHANK (108mm) | R32 | |
HEX 32 | 3050 | 10′ | SHANK (108mm) | R32 | |
HEX 32 | 3660 | 12′ | SHANK (108mm) | R32 | |
SR35
SR35 Button bit
Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
Gauge | Front | |||||||
[No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
| 5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 |
5 | 12.7 | 2 | 9.5 | 51 | 2″ | 1 | 2 | |
| 6 | 9.5 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
6 | 10 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
SR35 Drill rod
HEX Drifter rod SR35 - R38 - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3700 | 12′ 1-1/2″ | R38 | SR35 | |
HEX 35 | 4305 | 14′ 1-1/2″ | R38 | SR35 | |
HEX 35 | 4915 | 16′ 1-1/2″ | R38 | SR35 | |
HEX 35 | 5530 | 18′ 1-1/2″ | R38 | SR35 | |
HEX Drifter rod SR35 - T38 - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3050 | 10′ | T38 | SR35 | |
HEX 35 | 3700 | 12′ 1-1/2″ | T38 | SR35 | |
HEX 35 | 4305 | 14′ 1-1/2″ | T38 | SR35 | |
HEX 35 | 4915 | 16′ 1-1/2″ | T38 | SR35 | |
HEX 35 | 5525 | 18′ 1-1/2″ | T38 | SR35 | |
HEX 35 | 6140 | 20′ 1-1/2″ | T38 | SR35 | |
HEX 35 | 6400 | 21′ | T38 | SR35 | |
HEX SPEED Drifter rod SR35M - T38F - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ FEMALE TRAP. THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 35 | 3700 | 12′ 1-1/2″ | T38F | SR35M | |
HEX 35 | 4310 | 14′ 1-1/2″ | T38F | SR35M | |
HEX 35 | 4915 | 16′ 1-1/2″ | T38F | SR35M | |
HEX 35 | 5525 | 18′ 1-1/2″ | T38F | SR35M | |
HEX 35 | 6140 | 20′ 1-1/2″ | T38F | SR35M | |
Round Drifter rod SR35 - R38 - RD 39 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
RD 39 | 4305 | 14′ 1-1/2″ | R38 | SR35 | |
RD 39 | 4915 | 16′ 1-1/2″ | R38 | SR35 | |
RD 39 | 5525 | 18′ 1-1/2″ | R38 | SR35 | |
Round Drifter rod SR35 - T38 - RD 39 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
RD 39 | 4305 | 14′ 1-1/2″ | T38 | SR35 | |
RD 39 | 4915 | 16′ 1-1/2″ | T38 | SR35 | |
RD 39 | 5525 | 18′ 1-1/2″ | T38 | SR35 | |
RD 39 | 6140 | 20′ 1-1/2″ | T38 | SR35 | |
RD 39 | 6400 | 21′ | T38 | SR35 | |
R25/SR25
R25/SR25 Button bits
Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
Gauge | Front | |||||||
[No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
| 5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 |
5 | 7 | 2 | 7 | 33 | 1 5/16″ | 1 | 1 | |
5 | 8 | 2 | 7 | 35 | 1 3/8″ | 1 | 1 | |
5 | 8 | 2 | 7 | 36 | 1 13/32″ | 1 | 1 | |
5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 | |
5 | 11 | 2 | 10 | 51 | 2″ | 1 | 1 | |
| 6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
6 | 10 | 3 | 10 | 60 | 2 3/8″ | 3 | 1 | |
Flat Face / Retrac | ||||||||
| 5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 |
5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
Flat Face / Retrac | ||||||||
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 |
6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
6 | 10 | 3 | 10 | 60 | 2 3/8″ | 3 | 1 | |
R25/SR25 Cross bits
R25 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
Width | Height | |||||
[mm] | [mm] | [mm] | [in] | Front | Side | |
| 8 | 14 | 35 | 1 3/8″ | 1 | 4 |
8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
8 | 14 | 43 | 1 11/16″ | 1 | 4 | |
8 | 14 | 45 | 1 3/4″ | 1 | 4 | |
9.5 | 19 | 48 | 1 7/8″ | 1 | 4 | |
9.5 | 19 | 51 | 2″ | 1 | 4 | |
9.5 | 19 | 57 | 2 1/4″ | 1 | 4 | |
R25/SR25 Extension rods,drifter rods and shank rods
HEX EXTENSION ROD R25 - R25 - HEX 25 1″ ROPE THREAD (25mm) X 1″ HEX (25mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 25 | 610 | 2′ | R25 | R25 | |
HEX 25 | 915 | 3′ | R25 | R25 | |
HEX 25 | 1000 | 3′ 3″ | R25 | R25 | |
HEX 25 | 1220 | 4′ | R25 | R25 | |
HEX 25 | 1500 | 4′ 11″ | R25 | R25 | |
HEX 25 | 1525 | 5′ | R25 | R25 | |
HEX 25 | 1830 | 6′ | R25 | R25 | |
HEX 25 | 2100 | 6′ 10-1/2″ | R25 | R25 | |
HEX 25 | 2435 | 8′ | R25 | R25 | |
HEX 25 | 3050 | 10′ | R25 | R25 | |
HEX 25 | 3660 | 12′ | R25 | R25 | |
HEX 25 | 4305 | 14′ 1-1/2″ | R25 | R25 | |
HEX Drifter rod R25 - R32 - HEX 25 1″ ROPE THREAD (25mm) X 1-1/4″ ROPE THREAD (32mm) X 1″ HEX (25mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 25 | 610 | 2′ | R32 | R25 | |
HEX 25 | 1830 | 6′ | R32 | R25 | |
HEX 25 | 2130 | 7′ | R32 | R25 | |
HEX 25 | 2475 | 8′ 1-1/2″ | R32 | R25 | |
HEX 25 | 2600 | 8′ 6″ | R32 | R25 | |
HEX 25 | 2795 | 9′ 2″ | R32 | R25 | |
HEX 25 | 2895 | 9′ 6″ | R32 | R25 | |
HEX 25 | 3090 | 10′ 1-1/2″ | R32 | R25 | |
HEX 25 | 3700 | 12′ 1-1/2″ | R32 | R25 | |
HEX 25 | 4005 | 13′ 1-1/2″ | R32 | R25 | |
HEX 25 | 4305 | 14′ 1-1/2″ | R32 | R25 | |
HEX Drifter rod R25 - R32 - HEX 28 1″ ROPE THREAD (25mm) X 1-1/4″ ROPE THREAD (32mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 2475 | 8′ 1-1/2″ | R32 | R25 | |
HEX 28 | 2600 | 8′ 6″ | R32 | R25 | |
HEX 28 | 2795 | 9′ 2″ | R32 | R25 | |
HEX 28 | 2850 | 9′ 4″ | R32 | R25 | |
HEX 28 | 3090 | 10′ 1-1/2″ | R32 | R25 | |
HEX 28 | 3700 | 12′ 1-1/2″ | R32 | R25 | |
HEX 28 | 4005 | 13′ 1-1/2″ | R32 | R25 | |
HEX 28 | 4305 | 14′ 1-1/2″ | R32 | R25 | |
HEX Drifter rod R25 - R38 - HEX 28 1″ ROPE THREAD (25mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 28 | 2000 | 6′ 7″ | R38 | R25 | |
HEX 28 | 3090 | 10′ 1-1/2″ | R38 | R25 | |
HEX 28 | 3700 | 12′ 1-1/2″ | R38 | R25 | |
HEX 28 | 4050 | 13′ 3-1/2″ | R38 | R25 | |
HEX 28 | 4305 | 14′ 1-1/2″ | R38 | R25 | |
Shank rod R25 1″ ROPE THREAD (25mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 22 | 255 | 10″ | SHANK (108mm) | R25 | |
HEX 22 | 610 | 2′ | SHANK (108mm) | R25 | |
HEX 22 | 800 | 2′ 7″ | SHANK (108mm) | R25 | |
HEX 22 | 915 | 3′ | SHANK (108mm) | R25 | |
HEX 22 | 1000 | 3′ 3″ | SHANK (108mm) | R25 | |
HEX 22 | 1220 | 4′ | SHANK (108mm) | R25 | |
HEX 22 | 1830 | 6′ | SHANK (108mm) | R25 | |
HEX 22 | 2400 | 7′ 10″ | SHANK (108mm) | R25 | |
HEX 22 | 3050 | 10′ | SHANK (108mm) | R25 | |
HEX 22 | 3200 | 10′ 6″ | SHANK (108mm) | R25 | |
HEX 22 | 3660 | 12′ | SHANK (108mm) | R25 | |
HEX 22 | 4265 | 14′ | SHANK (108mm) | R25 | |
Shank rod R25 1″ ROPE THREAD (25mm) X 1″ HEX (25mm), 4-1/4″ SHANK (108mm) | |||||
| ROD CROSS SECTION | LENGTH (L) | THREAD | ||
mm | FT | Lifit | Right | ||
HEX 25 | 255 | 10″ | SHANK (108mm) | R25 | |
HEX 25 | 610 | 2′ | SHANK (108mm) | R25 | |
HEX 25 | 915 | 3′ | SHANK (108mm) | R25 | |
HEX 25 | 1220 | 4′ | SHANK (108mm) | R25 | |
HEX 25 | 1525 | 5′ | SHANK (108mm) | R25 | |
HEX 25 | 1830 | 6′ | SHANK (108mm) | R25 | |
HEX 25 | 2440 | 8′ | SHANK (108mm) | R25 | |
HEX 25 | 3050 | 10′ | SHANK (108mm) | R25 | |
HEX 25 | 3660 | 12′ | SHANK (108mm) | R25 | |
