Foundation Drilling Tools, Conical Tools, Cutting Tools, Cutter Picks
The round shank cutter tools and holders are using for foundation drilling; they are using for all kinds of piling machines and drill rigs.
We can supply all kinds of round shank cutter tools for foundation drilling, such as: 19mm, 22mm, 25mm, 30mm and 30/38mm shank cutter tools. The complete cutter tools apply for foundation creation, solid wall, water well drilling, trenching, mining and tunneling.
The feature:
1. Alloy steel body, made by material ASTM4140 (42CrMo) or ASTM5140 (40Cr), heat treatment with HRC38-42 hardness, has high toughness and wearable character.
2. Tungsten carbide tip is made from low press sintered and suitable grade selected according to target projects, which are to make sure the good performance during working.
3. The products adapt to the machine with all the performance features, such as a high feed rate, a long service life and short tools changing time.
4. Round shank cutter tools are suitable for excavation of sand, cobbles, weathered rock and hard rock.
Replacement of Betek specification:B47K17.5H, B47K19H, B47K22H, B43H, B85/2, BSK12, BSK15, BSK17, BTK01, BTK03, BTK07, BTK10, BTK14, BTK16, BTK62, BTK63, BTK70, DV08, DV25, BHR07, BHR12, BHR20, BHR167, BGS75, etc.
Replacement of Kennametal specification:C21, C21HD, C10, C10HD, C20, C31, C31HD, C30, U40HD, U47HD, DS01, DS04, DS05, DS06, U43H, etc.
Carbide Tips BKH47B / B47K22-HP
8 carbide strips effectively protect the drill bit.
Longer service life and cost savings.
SHANK SYSTEM – Ø 38/30 MM – 1,5/1,18″ | |
BKH110 BS38H-17.5070A | |
BKH110P BS38H-17.5070AP | |
BKH140 B47K17.5-H/2 | |
BKH28 BS38H-17.5065 | |
BKH80 B47K17.5LK70-H | |
BKH80/P B47K17.5LK70-HP | |
BKH83 BS38H-19.5065 | |
BKH41 B47K19LK80-H | |
BKH40 BS38H-19.5065 | |
BKH105 BS38H-22.5070B | |
BKH105/P BS38H-22.5070P | |
BKH85 BS38H-22.5070 | |
BKH130 BS38H-73.5070 | |
BKH47 B47K22-H | |
BKH47P B47K22-HP | |
BKH92 BS38H-30.6064 | |
BKH101 BS38H-69.5070 |